Transmitter

Power Supply:

From 4-20mA Loop

Supply Voltage:

18-24VDC

Output:

500Ohms Max at 24VDC

Output Isolation:

500VDC Process to Loop

Resolution (Range):

10.0pA (0-5000pA) Std, 5.0pA or 0.5pA Opt

Temperature:

-13F (-25C) to 160F (70C)

General:

Circuit boards conformal coated for long life in harsh environments

Sensor

Housing:

NEMA 4X Aluminum Std

Probe Lengths:

3, 5, 10, 15, 20, 30, 36" (Approximately 1/2 duct/pipe I.D.)
Extended nipples & rope sensors for large multicompartment baghouses

Mounting:

NPT, Tri-Clamp or Flange

Wetted Materials:

316SS and Teflon or Ceramic Std Hastelloy Opt

Process Temperature:

250F/120C Std 450F/232C Opt

Process Pressure:

10PSI (.69bar) Std, 50PSI (3.45bar) Opt, 100PSI(6.9bar) Opt 2-piece only

Sensor Cable:

300’ (100m) Max (2-piece configuration only)

Area Classification:

Ordinary locations (CE Approved) Std
Class I, II & III, Div II Only (CSA Approved) Opt

General:

No special alignment, not affected by normal process vibration

Application Range

Particulate:

Any type >0.3 micron - Conductive, non conductive, moist, corrosive

Minimum Detection Level:

With 10.pA resolution - Greater than 10mg/m3 (basic leak detection)
With 5.0pA resolution - Approx. 5-10mg/m3 (standard leak detection)
With 0.5pA resolution - Approx. 0.5mg/m3 (monitoring & analysis)