|
|||||||||||||
|
Products
|
Particulate Detectors: Models EM 30A and EM 10ASpecifications EM 30A
|
Electronics |
|
Power Supply: |
12-28VDC @ 3 watts |
Output: |
(2) Solid state relay @ 170mA, fixed set points |
|
For adjustable 5A relays refer to Model EM 30LGX |
Temperature: |
-15F (-25C) to +160F (+70C) |
General: |
Circuit board conformal coated for long life in harsh environments |
Probe |
|
Lengths: |
Heavy duty 3, 5 or 10” Std; 15, 20, 30, 36" Opt |
Mount: |
NPT Std, Tri-Clamp or Flange Opt |
Wetted Materials: |
316SS and Teflon Std, Hastelloy Opt |
Housing: |
Heavy duty NEMA 4X aluminum |
Temperature: |
250F Std (120C), 450F (232C) Opt |
Pressure: |
10PSI (0.69bar) Std, 50PSI (3.45bar) Opt |
Area Classification: |
Ordinary/general purpose, for hazardous areas refer to other models |
Application Range |
|
Particulate: |
Any type >10 micron, Conductive, non-conductive, moist, corrosive |
Minimum Detection Level: |
10pA - Greater than 10mg/m3 (basic leak detection) |
|
|
Electronics |
|
Power Supply: |
12-24VDC @ 3 watts |
Output: |
(2) Solid state relay @ 170mA, fixed set points |
|
For adjustable 5A relays refer to Model EM 30LGX |
Temperature: |
-4F (-20C) to +140F (+60C) |
General: |
Circuit board conformal coated for long life in harsh environments |
Probe |
|
Length: |
10” Light duty (shorten by customer if needed) |
For longer probes refer to the EM 30A and other models |
|
Mount: |
1/2” NPT |
Wetted Materials: |
304SS |
Housing: |
Light duty NEMA 4X aluminum |
Temperature: |
180F (82C) |
Pressure: |
3PSI (0.2bar) |
Area Classification: |
Ordinary/general purpose, for hazardous areas refer to other models |
Application Range |
|
Particulate: |
Dry Non conductive >10 micron |
Minimum Detection Level: |
10pA - Greater than 10mg/m3 (basic leak detection) |
|
|
© Copyright 2012, FilterSense, Inc. All rights reserved. See our Terms of Use. |